Comments Off

Vacheron Constantin & Audemars Piguet Extremely Skinny Semi-Skeleton Watches and Cal 2003 Movement

Audemars Piguet developed extremely-skinny manual winding motion with a thickness of 1.65mm. This motion, the thinnest on the earth at time, really made a hit. Thus far, this record has not been damaged by any motion that made by conventional watch making technique. Now , because of the advance of quartz watch technique, the thickness of movement may be lower than 1.0mm if lack of spring, steadiness and escape wheel and other essential parts.

In 1980s, there was as soon as an extremely-thin motion of solely 1.2mm at thickness. However most of bearings of the gear have been replaced by 13 ball bearings. Though it was comparatively thinner, it subjected to excessive breakdown rate and difficult upkeep as it was not completed by conventional watch-making technique. The perfect answer was to send to original manufacturing unit for service though it costed way more expensive.

Audemars Piguet Cal.2003 and Vacheron Constantin Cal.2003 are the same movement developed by Audemars Piguet and Vacheron Constantin and produced by Jaeger-LeCoultre. It's said that Cal.2003 is an Jaeger-LeCoultre movement. It is very unfair. As identified to all, Audemars Piguet and Vacheron Constantin are each large shareholders of Jaeger-LeCoultre. What's more, solely Audemars Piguet and Vacheron Constantin use this movement as much as now. This excellent motion is extremely-skinny, dependable and easy to care. It is so traditional that it is often applied in skeleton watches, coin watches and gilded watches. Although ultra-thin movement is not considered mainstream, it is worth acquire rigorously as it's exquisitely made.

The Audemars Piguet skeleton watch sports the 14K-gold-made Cal.2003. Normally the motion is crafted from alloy metal after which receives plating treatment. Therefore, the 14K-gold-made movement is rare. This Audemars Piguet also sports activities 18K gold web strap and Shanghai turtle bezel.

The Vacheron Constantin skeleton watch, outfitted with Cal.2003, can also be very special. The movement adopts regular design.The entrance looks lovely, you may see the gear cluster and the operation of escape wheel and balance. This mannequin reverses the movement by a hundred and eighty levels and arranges the pin on the center of the movement through the conversion of gear. Then it not only presents the beauty of motion operation but in addition studying of time. The gilding plate bears hand-engraved beautiful patterns and Geneva logoes. It is proved that this motion is of first-class craftsmanship.

Most of Audemars Piguet Cal. 2003 and Vacheron Constantin Cal.2003 are rhodium plated and has Geneva waves and scaly determine and 7 rubies. In earlier years, they were not equipped with anti-shock mechanism. Later, they have been geared up with KIF anti-shock mechanism, blued steel or alloy steel hairspring, alloy metal steadiness with make-up screws, 7-ruby-bearing and 5-course test timing. They beat at 18000 vibrations per hour with a thickness of of 1.65mm and a diameter of 21mm. Audemars Piguet Royal Oak Offshore Replica

Post in Replica Watches    Tags: , ,


Comments Off

Audemars Piguet Males's Watches: Royal Oak Idea

The Royal Oak Concept watch took Audemars Piguet greater than two years to supply due to its tedious technology concerned both in its motion and design. It's a mechanical and handbook-winding tourbillon. The ending is absolutely by hand to finish its chamfered and sapphire-blasted plates, bars and bridges in its movement.

It case is product of Alacrite 602 which is an alloy of cobalt, chromium, and tungsten used extensively within the aeronautical industry. The bezel is fabricated from titanium and the case is made to resist stress up to 50 bar and a water resistance up to 500m.

It has a thick case of 17.51mm and its sapphire crystal is 4.58mm thick too. Its caseback is transparent with sapphire crystal of 4.13mm thick. This positions the Royal Oak Concept watch to be able to withstand extreme conditions. Even the tourbillon is resting on just a few shock absorbers.

The ability reserve indicator is linear at 3 and reveals 1 barrel flip for each 6 hours. It also runs a Dynamograph at 12 which is a mainspring tourque indicator.

The dial is replaced by the bottom plate of the motion making it look skeletonized. It has a sub-dial for small seconds located at 6 and its tourbillon may be seen at 9.

The crown function selector is positioned at three with a pushpiece at 4. The pushpiece allows a selection to be neutral, rewinding, and hour and minutes where the crown can alter these three choices. This prevents wear and tear of the joints for the motion as well as improves its water resistance capability.

Its straps are all made from artificial fibers that use Audemars Piguet's clasp system made of titanium and stainless steel. This watch is a limited version of one hundred fifty pieces only rejoice the 30th anniversary of the Royal Oak. Audemars Piguet Royal Oak Replica

Post in Replica Audemars Piguet    Tags: , ,