Comments Off

Vacheron Constantin & Audemars Piguet Extremely Skinny Semi-Skeleton Watches and Cal 2003 Movement

Audemars Piguet developed extremely-skinny manual winding motion with a thickness of 1.65mm. This movement, the thinnest in the world at time, really made a hit. Thus far, this record has not been broken by any movement that made by traditional watch making technique. Now , due to the advance of quartz watch method, the thickness of movement may be less than 1.0mm if lack of spring, steadiness and escape wheel and other necessary parts.

In 1980s, there was as soon as an extremely-skinny motion of solely 1.2mm at thickness. But most of bearings of the gear had been changed by 13 ball bearings. Though it was relatively thinner, it subjected to excessive breakdown charge and troublesome upkeep as it was not completed by traditional watch-making technique. One of the best solution was to ship to authentic factory for service although it costed rather more expensive.

Audemars Piguet Cal.2003 and Vacheron Constantin Cal.2003 are the same motion developed by Audemars Piguet and Vacheron Constantin and produced by Jaeger-LeCoultre. It is mentioned that Cal.2003 is an Jaeger-LeCoultre movement. It is very unfair. As known to all, Audemars Piguet and Vacheron Constantin are both massive shareholders of Jaeger-LeCoultre. What's more, only Audemars Piguet and Vacheron Constantin use this movement as much as now. This wonderful movement is extremely-skinny, dependable and simple to care. It is so traditional that it is typically utilized in skeleton watches, coin watches and gilded watches. Though ultra-skinny movement isn't thought to be mainstream, it's price acquire fastidiously as it's exquisitely made.

The Audemars Piguet skeleton watch sports the 14K-gold-made Cal.2003. Usually the motion is crafted from alloy steel after which receives plating treatment. Subsequently, the 14K-gold-made motion is rare. This Audemars Piguet additionally sports 18K gold internet strap and Shanghai turtle bezel.

The Vacheron Constantin skeleton watch, geared up with Cal.2003, is also very special. The motion adopts normal design.The front appears to be like beautiful, you can see the gear cluster and the operation of escape wheel and balance. This mannequin reverses the motion by a hundred and eighty degrees and arranges the pin on the middle of the movement by means of the conversion of gear. Then it not solely gives the fantastic thing about movement operation but also studying of time. The gilding plate bears hand-engraved exquisite patterns and Geneva logoes. It's proved that this motion is of first-class craftsmanship.

Most of Audemars Piguet Cal. 2003 and Vacheron Constantin Cal.2003 are rhodium plated and has Geneva waves and scaly determine and 7 rubies. In earlier years, they weren't outfitted with anti-shock mechanism. Later, they have been geared up with KIF anti-shock mechanism, blued metal or alloy steel hairspring, alloy steel stability with make-up screws, 7-ruby-bearing and 5-path check timing. They beat at 18000 vibrations per hour with a thickness of of 1.65mm and a diameter of 21mm. Audemars Piguet Royal Oak Offshore Replica

Post in Replica Watches    Tags: , ,


Comments Off

Audemars Piguet Males's Watches: Royal Oak Idea

The Royal Oak Concept watch took Audemars Piguet greater than two years to supply due to its tedious technology concerned both in its motion and design. It's a mechanical and handbook-winding tourbillon. The ending is absolutely by hand to finish its chamfered and sapphire-blasted plates, bars and bridges in its movement.

It case is product of Alacrite 602 which is an alloy of cobalt, chromium, and tungsten used extensively within the aeronautical industry. The bezel is fabricated from titanium and the case is made to resist stress up to 50 bar and a water resistance up to 500m.

It has a thick case of 17.51mm and its sapphire crystal is 4.58mm thick too. Its caseback is transparent with sapphire crystal of 4.13mm thick. This positions the Royal Oak Concept watch to be able to withstand extreme conditions. Even the tourbillon is resting on just a few shock absorbers.

The ability reserve indicator is linear at 3 and reveals 1 barrel flip for each 6 hours. It also runs a Dynamograph at 12 which is a mainspring tourque indicator.

The dial is replaced by the bottom plate of the motion making it look skeletonized. It has a sub-dial for small seconds located at 6 and its tourbillon may be seen at 9.

The crown function selector is positioned at three with a pushpiece at 4. The pushpiece allows a selection to be neutral, rewinding, and hour and minutes where the crown can alter these three choices. This prevents wear and tear of the joints for the motion as well as improves its water resistance capability.

Its straps are all made from artificial fibers that use Audemars Piguet's clasp system made of titanium and stainless steel. This watch is a limited version of one hundred fifty pieces only rejoice the 30th anniversary of the Royal Oak. Audemars Piguet Royal Oak Replica

Post in Replica Audemars Piguet    Tags: , ,